Hours of Operation:

Whitby

Mon - Fri 8am - 6pm

Sat 9.30am - 3.30pm

Sun by appointment

Richmond Hill

Mon - Fri 9am - 6pm

Etobicoke

Mon - Fri 8am - 5pm

Gas Boilers - Trinity Ti

GENERAL TRINITY DOWNLOADS

Trinity Ti Installation Manual - Revised July 2010

Trinity T Series 6-1-04.pdf

Instructions d'installation et d'entretien

Sales Literature

***TS-80 INSTALLATION MANUAL (NEW)

TRINITY TECHNICAL AND SERVICE DOWNLOADS

Trinity Ti T2.0 Trouble Shooting Flow Chart

Trinity T T1.0 to T2.0 Trouble Shooting Flow Chart

Procedure for Cleaning

Cleaning and Service Procedure

Brazed Plate Hx Head Loss Curves

T150 Head Loss Curves

T200 Head Loss Curves

T400 Head Loss Curves

TOP TEN ADVANTAGES OF THE TRINITY

.   Available in both Natural Gas and Propane versions with a modulation system that eliminates additional models

.   State-of-the-art sealed modulation combustion system with hot

.   surface ignition

.   Patented 316L stainless condensing heat exchanger provides ultimate efficiencies

.   All connections are conveniently located for ease of installation.

.   Wall mount configuration saves valuable floor space

.   Vents easily with conventional ABS, PVC or CPVC plastic piping

.   The TRINITY has industry-leading modulation rates, which significantly increases comfort while reducing cycling and fuel consumption

.   The distinctive casing design reduces costly standby losses, while virtually eliminating combustion noises

.   High-capacity plate heat exchanger on combination models provides ample domestic hot water

.   The TRINITY is certified, designed and rated to strict CSA, AGA, ASME and CSAus codes

GENERAL SPECIFICATIONS:

	Ti100	Ti150	Ti200	Ti400
Size (D x W x L)	14" x 15.5" x 22"	14" x 15.5" x 22"	17" x 15.5" x 22"	23.5" x 21" x 36"
Weight	80 lbs.	80 lbs.	110 lbs.	205 lbs.
Max. Pressure	30 PSI	30 PSI	30 PSI	145 PSI
Gas Type	Natural, Propane	Natural, Propane	Natural, Propane	Natural, Propane
Max. Vent	105' equivalen	105' equivalent	105' equivalent	4"-30, 6"-65 eqv.
Gas Connection Size	1/2" NPT	1/2" NPT	1/2" NPT	1/2" NPT
Max. Supply Water	200°F	200°F	200°F	200°F
Min. Return Water	40°F	40°F	40°F	40°F
Oxygen Tube Barrier	Required	Required	Required	Required
Certification	CSA, AGA, CSAus, *ASME	CSA, AGA, CSAus, *ASME	CSA, AGA, CSAus, *ASME	CSA, AGA, CSAus, *ASME

HEATING SPECIFICATIONS:

	Ti100	Ti150	Ti200	Ti400
BTU Input x 1000	15-100	25-150	25-200	75-399
BTU Output x 1000	14-95	23-142	23-190	71-379
S.S Efficiency	98%	98%	97%	96%
AFUE	95.1%	95.1%	95.1%	95.1%
Head Loss @ GPM	12' @ 8	12' @ 8	13' @ 10	9' @ 20
Supply-Return	3/4" NPT	3/4" NPT	1" on H, 3/4" on C Models	1 1/4" NPT
Boiler Modulation Ratio	6.6:1	6:1	8:1	5.3:1
Flow Switch	Optional	Optional	Optional	Installed

DOMESTIC HOT WATER:
(Combi version)

	Ti150	Ti200
Supply-Return	3/4" NPT Outlet 1/2" Inlet
DHW Pressure Drop	1 PSI
Head Loss @ GPM	15' @ 8	18" @ 10
Temperature Regulation	Electronic Modulation
D.H.W. Outputs at	4.0 @ 110°F	5.5 @ 110°F
45° Inlet Water	3.5 @ 120°F	4.8 @ 120°F
(GPM @ Water °F)	3.1 @ 130°F	4.5 @ 130°F